[subpages]
Hot-tapping, or UPT, is the under pressure drilling of a live pipeline. All of our hot-taps are done with uninterrupted service or loss of product to the pipe or vessel. Pipeline Services cater for all product mediums across the pipeline industry including water, gas, oil, petrochemical, offshore and district heating.
We provide hot-tapping services for all pipe materials and sizes, with our equipment ranging from 1/2″ (12.5mm) diameter, up to 60″ (1500mm). We also offer a wide scope of hot-tap variations including angle taps, tank taps and flat plate taps as well as tappings for sample points and probe insertions. Our hot-taps can be done safely on pressures of up to 102 bar (1470 psi) and higher upon application on both hazardous and flammable materials...Read More
Line-stopping is a means of isolating a live pipeline to provide a shut off in the need of an emergency, temporary works or new pipeline connections. One of the common misconceptions of a line-stop is that the pipeline must be shutdown. When used in conjunction with a temporary bypass, the pipeline can be operated under normal conditions without interruption.
At Pipeline Services (UK), under pressure drillings and line-stops are the real core of our business. We believe the combined knowledge and experience of all our team enables us to provide cost effective and efficient line-stop solutions to all of our customers... Read More
At Pipeline Services (UK), we pride ourselves on being able to offer the best possible service to our customers for all sectors of the industry. In-house fabrication and machining facilities enables us to supply the industry with both mechanical and welded fittings globally.
Providing quality fabrication of both high and low pressure line-stop and hot-tap tee’s, along with bespoke fittings, our services are available for most pipe materials and product mediums. Our hot-tap and line-stop fittings are engineered to work seamlessly with all of our tapping and isolation equipment on all size ranges... Read More
At Pipeline Services (UK), we offer extensive coverage of all pipeline remedial works including in-house fabrication and engineering of bespoke pipework. Our scope covers everything from the manufacturing of bespoke fittings and pipework to installation, no matter the pipe size or material.
Our in-house fabrication and machining facilities, combined with our on site services, means we can offer cost effective and efficient solutions across all sectors of the industry no matter the product. Pipeline Services (UK) can offer fabrication to suit any pressure along with the installation of bespoke pipework or fittings. By offering full project management, our bespoke pipework can be used in conjunction with our other services such as line-stopping, hot-tapping or pipe-cutting... Read More
At Pipeline Services (UK), we cover a wide scope of in-house fabrication and machining facilities. From flange and fitting machining, to pipeline equipment such as valves and tapping machines, we can provide cost effective and efficient solutions for a variety of works.
In-house machining, combined with our in-house fabrication facilities, means bespoke fittings, pipework and machinery can manufactured with a quick turn-around. As a company, we pride ourselves on offering worldwide services. This also applies to our machining and we cover a varying amount of sizes, materials, pressures and product mediums...Read More
Pipe cutting is a fast and cost effective method of removing a damaged or redundant section of pipeline in a safe and controlled manner. At Pipeline Services (UK), our leading procedures mean cuts can be performed safely on nearly all types of product mediums including water, gas and oil along with many more.
Our leading methods allow us to work to extreme tolerances whilst providing an accurate and clean cut to the pipeline. Our pipe cuts can be done in any environment on most metallic pipelines such as ductile iron, cast iron as well as stainless and carbon steel... Read More
Quadrina tappings are commonly used to establish a connection to an existing pipeline whilst it remains in service. At PLS (UK), our quadrina drilling and tappings can be done without interruption to product flow or disruption to service.
Following a similar process to our hot-tapping/UPT service, quadrina tappings provide a temporary or permanent solution for new connections of an existing main without having to leave a sacrificial valve in place. Pipeline Services (UK) provide a wide range of nipples, plugs and ferrules from 3/4″ (19mm) up to 2″ (50mm) diameter to suit all pipe materials and sizes... Read More
Pipe freezing is a non intrusive and controlled method of isolating a piping system by injecting liquid nitrogen via freezing jackets until the product reaches a temperature below its freeze point and effectively isolates the system.
An alternative method to a line-stop or squeeze off, pipe freezing has many benefits. Our methods allow for a quick and efficient isolation of a pipeline or system for remedial works to be carried out. Pipe freezing can also be carried out in tight areas where other means of equipment would be hard to install... Read More
Pipeline Services (UK) and Pipeline Services Civil Engineering (Ltd) provide both PE welding and butt fusion services along with main laying and pipeline recommission. As part of our turn-key operations, we provide both on-site and in-house services for PE welding as well as main laying.
We cover all types of PE welding, including butt fusion and electrofusion welding. Butt fusion welding is a process which involves forcing two pieces of PE pipe together through an automated machine. Our processes and careful attention to detail allow us to work safely and efficiently on PE pipe sizes from 63mm up to 900mm... Read More
Along with both our machining and fabrication facilities, Pipeline Services (UK) provide a service centre for all pipeline equipment. Our knowledgable and experienced technicians are on hand to find the best cost effective and efficient solutions when it comes to pipeline equipment.
Having both in-house machining and fabrication facilities benefits us when providing service to equipment as it allows for a quicker rehabilitation process. We cover the rebuilding of all hot-tapping and line-stopping equipment as well as service to fittings... Read More
At Pipeline Services (UK), we pride ourselves on offering global under pressure solutions in many sectors of the industry. We provide services for the utilities sector including both clean and dirty water. From hot-tapping and line-stopping, to pipe-cuts and bespoke pipework fabrication, we cover a vast scope of works in the utilities sector, allowing us to find cost effective and efficient solutions for any problem.
Along with covering both clean and dirty water systems, we provide services on most metallic pipe materials. These include ductile iron, cast iron, carbon steel and stainless steel as well as GRE (glass reinforced epoxy) and GRP (glass reinforced plastic) pipelines. Our fabrication and machining facilities, along with turn-key operations, means as a company we can provide support and results for both clean and dirty water applications....Read More
At Pipeline Services (UK), we cover a vast range of clean water pipeline projects from hot-tapping and line-stopping, to pipe cuts, pipe installation, sample taps and probe insertion. Fabrication and machining of mechanical and welded fittings, for all types of projects, along with our turnkey operations, allows us to provide full support and solutions to all types of clean water practices.
Our services are available on a vast range of sizes and pipe materials from 1″ (25mm) – 48″ (1200mm) and bigger on application. Smaller hot-taps can be provided for sample points or probe insertions and we supply mechanical fittings to suit any pipe size or material. In- house fabrication and machining facilities, combined with our on-site services, mean we can provide cost effective and efficient solutions for clean water projects whatever the scope of works....Read More
Not only do we provide for clean water applications but our scope of works also covers dirty water. Pipeline Services (UK) offer a wide scope of works from hot-tapping and line-stopping to pipe cuts, pipe installation, sample taps and probe insertion. In-house fabrication and machining facilities are available and we cater job specifically to provide cost effective and efficient solutions.
Pipeline Services (UK) cover a vast range of sizes and pipe materials from 1″ (25mm) – 48″ (1200mm) and bigger on application. We supply fittings for most metallic pipe materials including ductile iron, cast iron as well as carbon and stainless steel. We also cater for PE pipelines including PE welding and repairs on sewage mains as well as new main laying. Under pressure drillings and line-stops can be done on both raw and sewage water along with pipe-cuts and probe or sample point taps....Read More
All of our hot-tapping and line-stopping equipment at Pipeline Services (UK) is designed and manufactured to work in all sectors of the industry, including gas. We provide full support in gas pipeline projects including hot-taps, line-stops, pipeline connections, pipe tie-ins, sample taps and drain taps.
We supply both high and low pressure hot-tap and line-stop fittings globally and all machining and fabrication is done in-house. Equipment is catered specifically for gas pipelines dependant on the pressure, size and temperature. We believe our knowledge and experience of the gas sector allows us to provide cost effective and efficient solutions. All of our works can be done safely and efficiently without any interruption to service.....Read More
Pipeline Services (UK) provide a huge scope of under pressure operations and solutions for the oil industry. We offer full support in oil pipeline projects, including offshore, covering every scope of works on near to all sizes of piping systems, pressures and temperatures. All works are catered for job specifically and our hot-tapping and line-stopping equipment is designed and manufactured work on high pressures and temperatures.
Operating globally, our experience of all sectors of the industry enables us to diversify between pipeline projects dependant on the product medium. We provide cost effective and efficient solutions on oil systems offering under pressure drillings, line-stops, pipe-cuts and fitting supply......Read More
We pride ourselves on having a team here at Pipeline Services (UK) which has an enormous amount of knowledge and experience to enable you to get the best out of every project. Our diverse range of equipment allows us to offer hot-tapping, line-stopping and pipework solutions on district heating lines for most pipe materials and various sizes.
We cater for every job specifically, with our equipment ranging from sizes 1″ (25mm) – 48″ (1200mm) and a standard operation temperature of 120°c and higher upon application. Welded and mechanical fittings are also produced in-house to allow for a quicker and more efficient service and are available in both high and low pressure applications....Read More
In accordance with our gas and oil services, Pipeline Services (UK) offer works offshore on a global scale. By offering a worldwide offshore service, we provide hot-tapping and line-stopping capabilities on the majority of pipe materials and sizes from 1″ (25mm) – 48″ (1200mm) and bigger upon application. Our equipment is catered job specifically, allowing us to offer services on high pressures and temperatures that can occur on offshore piping systems.
Along with providing services for the global upstream oil and gas industry, we provide works on downstream petrochemical facilities working on pipelines, flare lines and valves. All of our work is done safely and efficiently to provide cost effective solutions to our customers....Read More
Pipeline Services (UK) cover a vast range of pipeline projects on both petrochemical and aviation fuel pipelines worldwide. All projects can be completed on hazardous and flammable substances without any interruption to service and we provide a wide range of equipment sizes from 1″ (25mm) – 48″ (1200mm). Bespoke pipework and fabricated fittings are engineered in-house to suit varying temperatures, pressures and sizes no matter the environment to allow us to complete works safely and efficiently.
We provide global supply of mechanical and welded fittings for petrochemical and aviation fuel lines, along with offering under pressure drillings, line-stops and many more services. All of our works are done with due diligence and care, believing we can offer cost effective and efficient solutions on all piping systems......Read More
Our bespoke fittings are designed and fabricated in-house and are available in various sizes, pressures and material. As well as manufacture, we provide installation services on all of our bespoke fittings. Available both mechanically and welded, fabricating bespoke fittings in-house allows us to overcome pipe ovality or abnormalities. All fittings are catered job specifically and at Pipeline Services (UK) we are dedicated to making sure our clients get the best cost effective and efficient solutions. ....Read More
Pipeline Services (UK) provide both the manufacture and global despatch of both hot-tap and line-stop fittings. Our fittings, fabricated in-house, are available mechanically and welded for both high pressure and low pressure applications. All of our fittings are catered to work seamlessly with hot-tapping and line-stopping equipment on all size ranges... Read More
At Pipeline Services (UK) we manufacture and supply a wide range of hot-tapping and line-stopping equipment. All equipment is machined and serviced in-house, allowing us to cater for every sector of the industry. No matter the product medium, pressure or size, we can make, service and supply equipment to suit....Read More
Pipeline Services (UK) provides both the manufacture and supply of hot-tapping and line-stopping valves on a global scale. With in-house machining and fabrication facilities, we are able to design valves for a range of sizes from 1″ (25mm) – 48″ (1200mm) and bigger upon application. All valves manufactured in-house are catered to work seamlessly with our hot-tapping and line-stopping equipment and are available for both high and low pressure projects... Read More
[subpages]
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookies should be enabled at all times so that we can save your preferences for cookie settings.
They are required for certain features on the website and without them, the website would not function correctly.
If you would like to learn more about cookies or find out how to disable them in your browser, go to: https://cookies.insites.com/disable-cookies/
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
More information about our Privacy Policy